|
Please select from
the list below or the links on the right.
Battery Holders
(Plastic and Metal)
Battery holders provide a
convenient way for using batteries in different electrical circuits. Battery
holders also make it possible to combine multiple batteries in series or
parallel arrangements in order to produce higher voltage or higher currents.
| PBH4AAS is a square plastic
battery holder that holds 4 AA batteries, connecting them in series
arrangement to form about 6 V output. This battery holder has a red and
a black wire lead that are about 6 inches long each. Clearly marked for
the size and the direction of placing batteries. The center divider and
the side walls are curved to securely hold the batteries. |
 |
There are two screw holes at the bottom
that may be used to mount this battery holder. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. The ends of wire leads are stripped and tinned 5 mm.
(Price and Availability)
| PBH4AAL is a long plastic
battery holder that holds 4 AA batteries, connecting them in series
arrangement to form about 6 V output. This battery holder has a red and
a black wire lead that are about 6 inches long each. Clearly marked for
the size and the direction of placing batteries. The center divider and
the side walls are curved to securely hold the batteries. |
 |
This battery holder does not have any
holes at the bottom. It may be mounted using double sided adhesive tapes.
The ends of wire leads are stripped and tinned 5 mm.
(Price and Availability)
| PBH2AA is a plastic
battery holder that holds 2 AA batteries, connecting them in series
arrangement to form about 3 Volts output. This battery holder has a red and
a black wire lead that are about 6 inches long each. Clearly marked for
the size and the direction of placing batteries. The side walls are
curved to securely hold the batteries. |
 |
There are five screw holes at the bottom
that may be used to mount this battery holder. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. The ends of wire leads are stripped and tinned 5 mm.
(Price and Availability)
| PBH1AA is a plastic
battery holder that holds one AA battery. This battery holder has a red and
a black wire lead that are about 6 inches long each. PBH1AA is marked
with + and - signs to show the direction of placing the battery.
(Price and Availability) |
 |
There is one screw hole at the bottom
center of PBH1AA that may be used to mount this battery holder. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. The ends of wire leads are stripped and tinned about
five millimeters.
| PBH2C is a plastic
battery holder that holds 2 C cell batteries, connecting them in series
arrangement to form about 3 Volts output. This battery holder has a pair
of red and
black wire leads that are about 6 inches long each. Clearly marked for
the size and the direction of mounting the batteries. The side walls are
curved to securely hold the batteries. |
 |
There are six screw holes at the bottom
that may be used to mount PBH2C battery holder. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. The ends of wire leads are stripped and tinned 5 mm.
(Price and Availability)
| PBH4CL is a long plastic
battery holder that holds 4 C cell batteries, connecting them in series
arrangement to form about 6 Volts output. This battery holder has a pair
of red and
black wire leads that are about 6 inches long each. Clearly marked for
the size and the direction of mounting the batteries. The side walls are
curved to securely hold the batteries. |
 |
There are eight screw holes at the bottom
that may be used to mount PBH4CL battery holder. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. The ends of wire leads are stripped and tinned 5 mm.
(Price and Availability)
| PBH2D is a plastic
battery holder that holds 2 D cell batteries, connecting them in series
arrangement to form about 3 Volts output. This battery holder has a pair
of red and
black wire leads that are about 6 inches long each. Clearly marked for
the size and the direction of mounting the batteries. The side walls are
curved to securely hold the batteries. |
 |
There are 4 screw holes at the bottom
that may be used to mount PBH2D battery holder. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. The ends of wire leads are stripped and tinned 5 mm.
(Price and Availability)
| PBH1D is a plastic
battery holder that holds one D cell battery. This battery holder has a red and
a black wire lead that are about 6 inches long each. PBH1D is marked
with + and - signs to show the direction of placing the battery.
(Price and Availability) |
 |
There are two screw hole at the bottom
center of PBH1D that may be used to mount this battery holder. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. The ends of wire leads are stripped and tinned about
five millimeters.
| MBH1D is a
metal
battery holder that holds one D cell battery. This battery holder has
two Fahnstock clips for easy connection of any solid wires from 22 AWG
up to 14 AWG. This battery holder does not have any specific direction
for inserting the battery. You have choice to decide which end you want
to be positive and you may reverse it when needed. |
 |
Provided with two screw hole at the bottom
corners for attaching to a board or panel. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. Any number of cells can be connected in series or
parallel. (Price and Availability)
| MBH4AAS is a square
metal
battery holder that holds 4 AA batteries, connecting them in series
arrangement to form about 6 V output. It has two Fahnstock clips for
easy connection of any solid wires from 22 AWG up to 14 AWG. Clearly marked for
the direction of placing batteries using + and - signs. |
 |
There are six screw holes at the bottom
that may be used to mount this battery holder on a board or panel. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. (Price and Availability)
| MBH1DX is a
metal
battery holder that holds one D cell battery. This battery holder has
two Fahnstock clips for easy connection of any solid wires from 22 AWG
up to 14 AWG. This battery holder does not have any specific direction
for inserting the battery. You have choice to decide which end you want
to be positive and you may reverse it when needed.
Similar to MBH1D, with better quality. |
 |
Provided with two screw hole at the bottom
corners for attaching to a board or panel. The smooth flat bottom of
this battery holder also makes it possible to mount it using double sided
adhesive tapes. Any number of cells can be connected in series or
parallel. (Price and Availability)
| LC1929-8 is a single D cell
battery holder with strong plastic construction and joinable design.
These battery holders may be connected in series or parallel for
multiple voltage/ current outputs. Image in the right shows how 2 of
these holders may be joined (plugged to each other) in series or
parallel. Designed for teaching series and parallel connections. These
educational battery holders are often used to form 3-volt or 6-volt
battery sets. |
 |
(Price
and Availability)
| PBC9V is a
battery connector for 9-volt batteries. This battery connector has a
pair of red and black lead wires that are stripped and tinned 5 mm on
the ends. The connector back is covered with black vinyl for additional
protection and safety.
(Price
and Availability) |
 |
MiniScience is a wholesale distributor of
battery holders. Wholesale prices and quantity discounts are available
online. We accept special large quantity orders for other standard
battery holders that are not listed in this page. For special orders
please call MiniScience at (973) 777-3113.
|
Distributors of scientific and educational products
Where to buy?
Most pictures are linked to
the pricing and online store for fast and convenient ordering
Our products are available at the following
online stores. For large orders please call in advance and verify the
availability, wholesale discounts and shipping options. If you cannot find any
product in the online store of your choice, please use the search option of the
store or call (973)777-3113 for further assistance.
All orders will be shipped from our
warehouses in United States (USA), Canada or United Kingdom. We ship worldwide
to most countries including U.S., Canada, Australia, United Kingdom, New
Zealand, Germany, France, Netherlands, and many other countries.
|
|
